Spring 2024 Course Syllabus
Course: INTC-1355 (Section: 50, CRN: 10373)
Unit Operations
LSCPA Logo Image
Instructor Information
Instructor Thomas Janise
Email janiseth@lamarpa.edu
Phone (409) 984-6391
Office Umphrey Industrial Technology Center - Room: 201C
Office Hours Tu-Th 9am - 6pm by appointment only
Additional Contact Information janiseth@lamarpa.edu
Course Information
Description Automatic control requirements of industrial processes. Includes control systems, control loop tuning, and analysis.
Required Textbooks Textbook Purchasing Statement: A student attending Lamar State College Port Arthur is not under any obligation to purchase a textbook from the college-affiliated bookstore. The same textbook may also be available from an independent retailer, including an online retailer.

Use technology to access operator-specific documentation and training.
2. Identify specific equipment and operating parameters to meet industry standards.
3. Describe the principles of quality control.
4. Diagram the process control elements in a control loop.
5. Identify basic processes, equipment, and systems to meet industry standards.
6. Implement standard safety procedures as required in industry.
7. Demonstrate comprehension of content-area reading material.
Additional Materials/Resources None.
Corequisites/Prerequisites
  • INTC-1301 Principles of Industrial Measurements I
  • INTC-1341 Principles of Automatic Control
  • INTC-1343 Application of Industrial Automatic Control
  • INTC-1343 Application of Industrial Automatic Controls
Learning Outcomes
  1. Describe the basic functions of process equipment. (PSLO 1); measured by embedded test questions, class discussion, and demonstration on actual process equipment

    2. Describe related scientific principles associated with process equipment. (PSLO 1); measured by embedded test questions, class discussion, and demonstration on actual process equipment

    3. Identify process equipment components. (PSLO 2); measured by embedded test questions, class discussion, and demonstration on actual process equipment.

    4. Demonstrate ability to use terminology to describe components of process equipment. (PSLO 2); measured by embedded test questions, class discussion, and demonstration on actual process equipment.

    5. Demonstrate operation of basic equipment components used in the process industries. (PSLO 3); measured by embedded test questions, demonstration on actual process equipment

    6. Demonstrate safety procedures used during cleaning out, isolation, and repair of process equipment. (PSLO 4); measured by embedded test questions, demonstration on actual process equipment.

    7. Describe the roles, responsibilities, safety, environmental, and quality concepts associated with the work environment of a process technician; and identify basic processes, equipment, and systems.
Program Student Learning Outcomes Use technology to access operator-specific documentation and training.
2. Identify specific equipment and operating parameters to meet industry standards.
3. Describe the principles of quality control.
4. Diagram the process control elements in a control loop.
5. Identify basic processes, equipment, and systems to meet industry standards.
6. Implement standard safety procedures as required in industry.
7. Demonstrate comprehension of content-area reading material.
Lecture Topics Outline

Week 1

Chapter 1 Process Tech Overview - Review Questions
Chapter 2 Mineral Extraction - Review Questions

Week 2

Chapter 3 Chemical and Pharmaceutical- Review Questions
Chapter 4 Power Generation- Review Questions

Week 3

Chapter 6 Water and Wastewater Treatment- Review Questions
Chapter 7 Pulp and Paper Industry- Review Questions

Week 4

Review of Chapters 1 through 7
Exam 1

Week 5

Chapter 8 Working as Teams - Review Questions
Chapter 9 Safety Health and Environment - Review Questions

Week 6 

Chapter 10 Quality - Review Questions
Chapter 11 Basic Physics - Review Questions

Week 7

Chapter 12 Basic Chemistry - Review Questions
Chapter 13 Process Drawings - Review Questions

Week 8

Chapter 14 Piping and Valves - Review Questions
Chapter 15 Vessels - Review Questions

Week 9

Review of Chapters 11 through 15  
Exam 2

Week 10 

Chapter 16 Pumps - Review Questions
Chapter 17 Compressors - Review Questions

Week 11

Chapter 18 Turbines - Review Questions
Chapter 19 Electricity and Motors - Review Questions
Chapter 20 Heat Exchangers - Review Questions

Week 12

Review of Chapters 16 through 21
Exam 3

Chapter 21 Cooling Towers - Review Questions
Chapter 22 Furnaces- Review Questions
Chapter 23 Boilers - Review Questions

 Week 13

Chapter 24 Distillation- Review Questions
Chapter 25 Process Service Utilities- Review Questions
Chapter 26 Process Auxilliaries- Review Questions
Chapter 27 Instrumentation- Review Questions

Week 14
Review of Chapters 22 through 27
Exam 4


Week 15

Final Exam Study Guide
Review for Final Exam

Week 16


Final Exam

Major Assignments Schedule

Week 1

Chapter 1 Process Tech Overview - Review Questions Due
Chapter 2 Mineral Extraction - Review Questions Due

Week 2

Chapter 3 Chemical and Pharmaceutical- Review Questions Due
Chapter 4 Power Generation- Review Questions Due

Week 3

Chapter 6 Water and Wastewater Treatment- Review Questions Due 
Chapter 7 Pulp and Paper Industry- Review Questions Due 

Week 4

Review of Chapters 1 through 7
Exam 1

Week 5

Chapter 8 Working as Teams - Review Questions Due 
Chapter 9 Safety Health and Environment - Review Questions Due

Week 6 

Chapter 10 Quality - Review Questions Due
Chapter 11 Basic Physics - Review Questions Due

Week 7

Chapter 12 Basic Chemistry - Review Questions Due 
Chapter 13 Process Drawings - Review Questions Due 
Week 8

Chapter 14 Piping and Valves - Review Questions Due 
Chapter 15 Vessels - Review Questions Due

Week 9

Review of Chapters 11 through 15  
Exam 2

Week 10 

Chapter 16 Pumps - Review Questions Due 
Chapter 17 Compressors - Review Questions Due 

Week 11

Chapter 18 Turbines - Review Questions Due 
Chapter 19 Electricity and Motors - Review Questions Due 
Chapter 20 Heat Exchangers - Review Questions Due 

Week 12

Review of Chapters 16 through 21
Exam 3

Chapter 21 Cooling Towers Review Questions Due 
Chapter 22 Furnaces
Chapter 23 Boilers 

 Week 13

Chapter 24 Distillation Review Questions Due 
Chapter 25 Process Service Utilities Review Questions Due 
Chapter 26 Process Auxilliaries Review Questions Due 
Chapter 27 Instrumentation Review Questions Due 

Week 14
Review of Chapters 22 through 27
Exam 4


Week 15

Final Exam Study Guide
Review for Final Exam

Week 16


Final Exam

Final Exam Date May 6, 2024 - 6:0 AM   Through  May 8, 2024 - 6:0 PM
Grading Scale
Determination of
Final Grade
10% - Attendance/Participation
30% - Exams
30%  - Assignments
30% - Final Exam
  
Course Policies
Instructor Policies I will not discuss your grades over the phone or by email. If you want to discuss your grades, you must come to my office, in person.

By appointment only...email at janiseth@lamarpa.edu
Attendance Policy Course Attendance score will count as an Exam.  4 unexcused absences results in a drop of a letter grade.   11 unexcused absences results in course failure. 

Positive COVID test must be verified by a lab report
Additional Information
Institutional Policies
MyLSCPA Be sure to check your campus email and Course Homepage using MyLSCPA campus web portal. You can also access your grades, transcripts, academic advisors, degree progress, and other services through MyLSCPA.
Academic Honesty Academic honesty is expected from all students, and dishonesty in any form will not be tolerated. Please consult the LSCPA policies (Academic Dishonesty section in the Student Handbook) for consequences of academic dishonesty.
ADA Considerations The Americans with Disabilities Act (ADA) is a federal anti-discrimination statute that provides comprehensive civil rights for persons with disabilities. Among other things, this legislation requires that all students with disabilities be guaranteed a learning environment that provides for reasonable accommodation of their disabilities. If you believe you have a disability requiring an accommodation, please contact the the Office for Disability Services Coordinator, Room 231, in the Madison Monroe Building. The phone number is (409) 984-6241.
COVID 19 Information The Lamar State College Port Arthur (LSCPA) Student Code of Conduct COVID 19 Policy requires students who have been diagnosed with COVID 19 to report their condition directly to their local health department. Students should also contact their course faculty to report their quarantine status. In addition, this policy requires all students to wear face coverings when directly exposed to COVID 19 in compliance with the criteria included in the policy. For more information please refer to the COVID 19 link on the LSCPA website.
Facility Policies No food or tobacco products are allowed in the classroom. Only students enrolled in the course are allowed in the classroom, except by special instructor permission. Use of electronic devices is prohibited.
HB 2504 This syllabus is part of LSCPA's efforts to comply with Texas House Bill 2504.
Mandatory Reporting of Child Abuse and Neglect As per Texas law and LSCPA policy, all LSCPA employees, including faculty, are required to report allegations or disclosures of child abuse or neglect to the designated authorities, which may include a local or state law enforcement agency or the Texas Department of Family Protective Services. For more information about mandatory reporting requirements, see LSCPA's Policy and Procedure Manual.
Title IX and Sexual Misconduct LSCPA is committed to establishing and maintaining an environment that is free from all forms of sex discrimination, including sexual harassment, sexual violence, and other forms of sexual misconduct. All LSCPA employees, including faculty, have the responsibility to report disclosures of sexual misconduct, including sexual harassment, sexual assault (including rape and acquaintance rape), domestic violence, dating violence, relationship violence, or stalking, to LSCPA's Title IX Coordinator, whose role is to coordinate the college's response to sexual misconduct. For more information about Title IX protections, faculty reporting responsibilities, options for confidential reporting, and the resources available for support visit LSCPA's Title IX website.
Clery Act Crime Reporting For more information about the Clery Act and crime reporting, see the Annual Security & Fire Safety Report and the Campus Security website.

Grievance / Complaint / Concern If you have a grievance, complaint, or concern about this course that has not been resolved through discussion with the Instructor, please consult the Department Chair.
Department Information
Business and Industrial Technology
Chair:Sheila Guillot
Email:guillsr@lamarpa.edu
Phone:(409) 984-6381